Search results

This is great, thank you for the advice. Didn't know these existed, and looks to be the option I will be going with. Moving the standpipe out of the way will be no issue, to drill out the tee through the hole in the stud.

Hole is right on the edge and slightly behind the stud shoe. There is unfortunately no room at this location for a coupling

Thanks for the idea. I like it, but unfortunately, the hole is right on the edge/behind the stud shoe, and would not get full coverage

While attempting to drill out a new hole in a stud shoe, due to a large knot in the stud interfering with the factory hole placement, I slid off the steel and put a 7/64" hole through the standpipe tail piece, right at the stud. I was working at a poor angle, rushing, and am already extremely...