Search results

Update Leak increased to filling up the pressure tank every 5 mins. Had to turn pump on only when needed. Plumbers came and found leak in shower floor with the leaking pipe being from the hot water tank. No evidence of leaked water anywhere inside or outside. When they shut the hot water off at...

Not ignoring suggestion. Tank is 15 years old. Already ordered new one. Will get a pressure tank specialist to look at what may be a leak in house plumbing if I could find one here on the island in mexico. Not an easy task, but will try. Thanks for your input.

Thank you for your help.

Thank you for your help.

Thank you your help.

I think I'm just looking for easy fix. If the leak is in walls of house I think I should have see water leaking by now. Concrete and cement block house. I'm going to replace tank and new tee kit and see if it helps. Tank is 15 years old. Can't hurt. After that, if still having trouble, I hope to...

# 1. If your saying the tank is leaking, I agree. When I turned the valve that is installedafter the tank back on, the pressure gauge showed the pressure to be approx. 32psi. immediately. #2. The pressure switch is installed at the tank. That is correct. #3. The valve installed before the tank...

OK. I shut the valve after the tank that feed the house. I waited 12 mins. No change on pressure gauge. When I turned that valve back on, the pressure went from 50psi to 32psi. Then I filled the tank back up to 50psi, left the valve open after the tank but shut the valve off before the tank but...

What kind of valve after pressure tank? I do have an on off valve installed after pressure tank. Check valve installed 3 days ago, no improvement. Leak somewhere in the house will be a nightmare. I'm in mexico and house is made of cement and cement block. I'm planning to update copper pipe from...

Hello. I have some kind of leak in my house water pressure system. System is about 15 years old. 1/2 hp pump in a cistern about 6 ft. down. There is a new check valve about 3 ft from the pump. I have a CSV installed 5 ft. from the pressure tank. Tank is 20gal. New pressure switch and new...

Hi. Simple problem for you guys.Im going to update my pressure tank tee kit. I have a WW+20 h2pro tank. Maybe 15 years old. I don't know what size pipe threads into the tank at the bottom that everything connects to. Is it 1" or 1 1/4" ? Does this main pipe have threads of 1" inside the pipe...