Search results

The sediment filter although cleaned up will need to be replaced with a new one. There's what looks like black sand that I need cleaned up. I flushed the water heater + pressure tank at least once. Will do it again.

Hi all, just want to give an update. I finally got around re piping the well filtration system. Clearing the area and moving the well pressure tank made a huge difference, and with the new installation the issue is solved. Yes, the old filter was never done properly. Here's what was done: Moved...

Yes I do, exactly like you have shown.

This is a new house to me. I removed the well tank to access the corner and have better visibility and also, took the entire right portion off the connection (emptied well tank etc....) I was still getting water in the faucets with high pressure and well pump running. The check valve in the AIO...

I guess I had the one other version of #1 is having a loop back-feeding into itself.... When you think you've seen it all :oops:.

Hello all. I think this entire mess was caused by an ignorant installation.... and my oversight when changing the filter media / etc.... The pipes behind the well pressure tank in a corner was not fully visible to me. The pump and junction are in the crawlspace. The filtration is not in the...

Thank you for the quick reply. I did install an expansion tank for the heater (cold side) and set it to 80 psi (rated at 100 psi), although with a well tank I should not have needed one. I will re-test with the water heater off (power and water) and report back. I personally wonder if it is the...

Update: After posting this. I found major issue in this setup. Please see my updated figure below. The issue is that the filtration loop was going nowhere. The diagram explains it best. Hello, Please bear with me as I explain the situation. It is very odd and I cannot find a resolution. I...