Search results

  1. Z

    Well pump output fade

    Thick application of shaving cream
  2. Z

    Well pump output fade

    Checked that, not the problem
  3. Z

    Well pump output fade

    6 Pipes each ~30 feet down, see attached pic for point spread. No casings. The thing is, the sprinklers ALWAYS start full bore. This means there is ample water at the start atthe one way valve, 2 feet from the pump Adding pictures to explain/support my description. When I open tap A to add...
  4. Z

    Well pump output fade

    Adding pictures to explain/support my description. When I open tap A to add the county water supply with the pump on, the pump output immediately goes to max. When I close A off, it does not decay instantly but takes quite a few seconds to taper off. 1. Number 1 to 6 are the point locations...
  5. Z

    Well pump output fade

    I have a 30 ft deep well with 1.5HP, 4 zones, about 15 years old I have 6 well points, all same depth, about 30ft each, all connected to the same input pipe, level about 2ft underground, sandy soil. The 6 points are in a straight line about 9 ft apart each. Here is my problem. When the pump...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks