Search results

From 40psi to 67psi it took 3 min 45 seconds with no demand. Yeah, as I thought about the hot water situation, that became clear. Thank you for clearing it up... The tee itself is fine but there is no check valve (sounds like its unnecessary anyway), no pressure relief valve, and a gate valve...

Did some diagnostics, I think I have this mostly worked out. Turned on 4 faucets, 2 upstairs 2 on main level. Should be about 6gpm. Watched the pressure and the switch. Went down all the way to ~35psi before clicking on and all the way to ~65psi before clicking off. Took about 15 minutes to...

Actually before seeing your reply, I had already discovered and ordered from CSV. I will see if that fixes or mitigates the issue. Another thing I’ve been thinking about is the hot water tank. I’ve got a 50 gallon now. I was wondering if I should upgrade to a 75-98 gallon to help the cause...

Yes I believe my pressure is low when there is no flow. I will double check to be sure . Thank you!!!

Hello all, I've been googling and youtubing my heart out trying to find the correct solution to the minor issue I'm having. I'm in Brighton, MI. 2 story home with basement. I have a submersible well pump, 5" casing. 114ft deep and static water level 69ft below surface. Well pressure tank is...