Search results

UPDATE: After throwing some parts at it, 2 of the 3 that are in the air handler lol (relay and rectifier) transformer tested good. I decided to change the speed tap to high from medium. It has been working for 2 days. I thought maybe the A coil was freezing up from not enough air flow through...

I do not have a door safety switch and I do not see a fan capacitor on the air handler. There are only 3 electrical pieces inside the cabinet. A transformer, rectifier control and 24v relay. I ordered the last 2. Will see what happens.

Thanks guys. The AC compressor runs without the handler blowing. So I guess that eliminates low pressure on AC. My handler does not have a printed circuit board (PCB). I had 28v at stat. The 12 minute wait does make sense since things were on and off. The search continues Lol

Tempstar FEM4P3000AT air handler with heat strips. AC model N4A330AKC200 Problem: On auto mode, once the unit cycles off completely, then AC condenser kicks back on, the air handler does not, leaving the AC compressor running without air handler running. I can put Stat in "fan" mode and AC...

First I want to say the folks at CSV have the best support you can ever imagine. Thank you all very much! UPDATE: I was going to change the pump over to your recommendation. I went under the house to start taking the other pump out. My wife was showering at the time and I noticed that the...

I had a feeling "valveman" may be part of the csv company when I receive your response. My apologies, when I finished last night I figured the company was closed and I was a little worried something was wrong. I will get a pic asap, not easy access and not a lot of room in that crawl space...

I have been working with the folks at CSV and they have been great. They too said that all the way in should be about 125 psi. New 1/2 hp pump, 30/50 switch (ridgid from home depot) I know not best, but I had no water and was in jamb. CSV said that pump should be making more pressure than it...

Good evening. My 4.4 gallon pressure tank arrived today. I adjusted the pressure to 28 pounds to match my 30/50 pressure switch. I followed instructions to adjust the csv. The bolt on the top is almost all the way down to get to 40 psi while a shower was running. Shower head is newer,, within 8...

Thank you sir!

I bought a CSV valve and 4.4 gallon pressure tank. Currently everything to and from my pressure tank is 3/4 pipe. Can I reduce the inlet and outlet of the CSV to 3/4 and continue to use 3/4 pipe? Thank you

I am trying to help a family out. They had no water and installed a new pump, check valve, pressure switch and small pressure tank. They still weren't able to get any water and exposed the 1 1/4 black line buried in the ground. I also noticed a coupler under the house near where the black pipe...