Search results

I apologize for the duplicates

Ready to start installation of Pressure reducing valves, shutoff and Pressure gauge and all. Its a tri level, slab and crawl space. Main water supply is 3/4 inch copper and enters home through basement slab into concrete block shower floor. And silcock is just 1 inch off the floor I'm...

Any thoughts at all. I'll never find a leak.

Appreciate everyone's advice. Thank you for your time and consideration. Rebecca

Meter 1,800 ft from where it enters home. Do you think additional shutoff should be installed to isolate location of future potential leaks? At least where it enters our property at 1,500 from meter. Grateful for any suggestions.

Thank you for the link.

The house much lower. Very concerned about water main. The first 900 ft will have 8 splice/ couplers. Contractor is using insta-tite stab fittings. I'm not familiar with this type. The first 1,500 ft is the neighbors property but my responsibility as easement holder. I have little to no input...

Shared well will be closed March 1st by neighbor as a result of water sample result. They won't consider shock/ chlorination. Installation of new city water line starting next week. (January in Indiana) Meter will be at top of driveway 1,800 ft from my home. Have shutoff valve outside. Main...

I've lost the option to remain on shared well. The neighbors are closing the well march 1st due to recent water sample results. They won't consider shocking/ chlorination. Water line installation starts this month with meter at top of 1,8000 ft driveway. My immediate question. Main line enters...

35 years on well water, must switch to Rural water. Meter to house is approximately 2,000 ft down our gravel driveway. Field stone and limestone rich area. Contractor is going to use 1 inch PE pipe. Is it large enough? To start HDPE seems a better choice. What specific information should I...