Welcome to Terry Love Plumbing & Remodel DIY & Professional Forum. More ยป
Separate names with a comma.
I am planning to replace the 2 old shutoff valves under sink(as shown below) with the quarter turn shut off valve by BassCraft and its supply...
I the following Nibco shutoff valve and is 20 years old. [ATTACH] [ATTACH] It has the 2 problems. It does not shut off water completely and...
I have a leak or water dropping from the 1/2" washing machine shutoff valve as the photo shows below. Is this fixable by opening packing nut and...
I have about 40 years old bathtub wall tiles with grout in between. The tile size is about 4 x 4 and grout is about 1/8 to 3/16" thick. It is...
Maybe due to lack of enough experience, I am afraid of water-leaking when replacing the faucet compression shut-off valve. May I ask 2 questions...
I have a kitchen faucet shut-off valve that keeps turning and does not turn off off water. I was replacing the water filter under the sink, and...
I can not turn the handle to close the cold line faucet to the washing machine. I think it has been more than a decade at least to turn the handle...
I researched this site and learned that it is not easy to replace very old(40 yrs) bathtub drain. Can I ask 3 questions? 1. Is it difficult to...
I have an old p-trap under the bath sink, that is 1-1/2 in diameter. The top p-trap nut that joins the 1-1/4 sink drain tailpipe with the 1-1/2...
Is this (the one in yellow circle) an old compression shut-off valve? If so, do I hold the #1 with a wrench and turn the #2 clockwise to remove...
I am a plumbing newbie DIY and am thinking of purchasing 36" bathroom faucet supply lines. I noticed these as a pair at about $12 from Everflow...
I have removed about 40 years old bathroom faucet, and there are reddish rust stains where the handles were. I tried the Iron Out, rust stain...
[ATTACH] I have the florescent light in bathroom, and I want to replace the ballast. I tried to pull out the cover, but somehow it does not come...
My Mixet shower valve was difficult to divert temperature from hot to cold and vice versa. It was about several years since a pro plumber...
I have the 2 door sliding shower doors. One of it has a crack of about 2 inches or so at the top of the door frame. The door has the roller at...
I have more than 30 year old gas furnace made by "Day & Night". I need to replace the old Robertshaw thermostat, which controls gas furnace and...
I am a novice DIY in plumbing. I need to replace at least 30 years old shut-off value in the bathroom sink shut-off valve. I showed the attached...
