Search results

  1. TubeNoob

    Metal closet flange too high - help!

    Hi folks - just wanted to give a quick update and close the loop on this. Thanks for all of the quick replies and great suggestions. I was able to get my old plumber in to take a look (we took a chance on a new guy and it didn't go well). By removing the embedded black plastic horn in the...
  2. TubeNoob

    Metal closet flange too high - help!

    Hi, unfortunately we're dealing with copper pipes in this setup. The photo I posted is misleading since there was still a black plastic horn jammed in the flange (pulled that out after picture was taken). The waste pipes are all 3" copper, which I'm guessing makes this much more complicated...
  3. TubeNoob

    Metal closet flange too high - help!

    We live in an older house and are updating some of the fixtures in our powder room. After removing the existing toilet, I knew that we might have a problem with the existing closet flange. The flange itself seems it good condition, but sticks up about 1/2" to 5/8" above the finished tile...
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks