Search results

  1. CaliGirlSF

    Looking for recommendations for a thermostatic shower valve

    Either one is good..just an older design compared to new. They both use same valve and cartridge, can't see why they would have different flow rates. In the end, 6 or 7, either is fine. Showerhead/handheld would be restricted to lower flow anyway.
  2. CaliGirlSF

    Looking for recommendations for a thermostatic shower valve

    I second that comment...Hansgrohe has a better option. Take a look at the 15758001-dual function therm. Grohe is not the easiest to deal with these days.
  3. CaliGirlSF

    Identify and replace old shower cartridge

    Looks like Dornbracht..tried to find a breakdown, no luck.
  4. CaliGirlSF

    Vintage bathroom sink faucet

    Top white cap should screw off, then polish chrome ring should lift off. You should be able to remove handle from top of sink and replace the cartridge. Unfortunately, there are numerous manufacturers that offered that design. Price Pfister(handles look like PP, but not spout), Newport Brass...
  5. CaliGirlSF

    Need help identify faucet brand

    Hi~ This is a Hansgrohe Tango C #06040620. You can find breakdown on the Hansgrohe website in their "spare parts catalogue"
  6. CaliGirlSF

    Help Identify This Shower Stem

    Do you have a picture of the handle/trim?
  7. CaliGirlSF

    Grohe Sinfonia, Looking for a hot stem, 8" wide spread faucet

    This is a Grohe Sinfonia 20.655~cartridges are 45.882 and 45.883~
  8. CaliGirlSF

    Price Pfister 910-3000, NEED HELP ON THESE STEM'S

    Looks like old Price Pfister 910-3000~
  9. CaliGirlSF

    Grohe Exquisit , Bathroom & Kitchen Faucet Manufacturer I

    Grohe Exquisit series... Link added by Terry
  10. CaliGirlSF

    Good Quality Shower Curtain Rod.

    Try the manufacturer "Ginger"
  11. CaliGirlSF

    Identify lav hardware please!

    Looks like an old "Epic" by Delta faucet
  12. CaliGirlSF

    Please help in identifying this faucet

    This is a Price Pfister "Marielle"
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks