Search results

Adding photos work really well but the 643 ads on the site now sure have no issues….

Attn

So why are these posted online when everything ive been taught would say neither of these are acceptable or at least not described correctly… the one image shows a “vent stack” that has water that runs through it so that to means its a stack vent instead. And the other shows wye fittings that...

So why is it that i cant run in parallel with different size heaters? As long as i use same amount of pipe which would make my cold water tee slightly closer to the shorter tank which is the same difference in height. And if i verify the temperature is coming out the same by simply closing one...

Saw that right after sent message. So will thermosyphoning still work without use of a pump as long as i loop back from furthest highest fixture which would be upstairs shower. And which water heater should the water enter first to maximize length and efficiency

Im not running them in series cause if one heater goes to hell then have no hot water. Ive been looking at the temperature control valves where it mixes the cold and you crank up ur heater to like 140. If i got them to be coming out at the same temp and the same amount of pipe from the bottom of...

So wondering to be sure on thermospyoning and gravity fed system. Ive got 2 water heaters that are different size. My plan was to just run loop back from the upstairs shower line being the highest and furthest away fixture. But i also have a toilet and vanity and wash machines on basement level...

Theres 2 electric meters and panels. Not water meter tho. And when i say check valve i more/less mean backflow preventer. And yes i am having it return piped. But i dont want a recirculating pump cause from my understanding itll make water heaters run more and wear them out quicker and just...

Also wondering about best ox box setups with water hammers, brand? Location?

So this is in wisconsin and it is a duplex setup not currently rented and whole house is still used. So plumbing was done back probably in 70s and imo ran very inefficient and improperly. Am replacing all the waterlines to pex and are currently copper/steel. So ill layout my current plan and...