Search results

  1. Master Plumber Mark

    Power Vented vs Power Direct Vented

    If you are wise you just get yourself a normal common Rheem power vented unit and stay away from those other special units..... they cost about the same price on line but I think about the future servicability and I have never actually stumbled onto a direct vented heater in our area...
  2. Master Plumber Mark

    Resin escape, help with rebed and diagnosis

    I got about 6 of them in stock laying around right now.... I also had the same issues trying to find them and the only place that even knew about them is wood brothers.... The screen goes into the out put side of the black bypass that goes onto the back side of the Clack control head...
  3. Master Plumber Mark

    Resin escape, help with rebed and diagnosis

    These screens are new to me too....I get them from Woods Brothers out of Nebraska and Indianapolis.... I Cant seem to find them anywhere else but they are such a simple and easy way to keep the resin from screwing up the whole house..... if the resin rises, then it just stops the whole...
  4. Master Plumber Mark

    Resin escape, help with rebed and diagnosis

    You need to just go get a new clack unit with the #10 resin in the unit.... dont fool with trying to resurrect that older unit......... Odds are that their is a good chance the resin just blew up and expanded due to the chlorine in the water we get this happening all the time with the cheap...
  5. Master Plumber Mark

    Hot Water Heater Outside Backdraft Options?

    The Bradford white anode rod is located attached to the hot water side nipple which is very easy to replace... I would not attempt to change out a rod with a hex head that is basically been hammered down into the socket and wont come out without extreme effort and misery
  6. Master Plumber Mark

    New gas service. Can we get meter turned on with capped/ pressure tested only?

    So You want to be left alone to "Doing your own thing." I suggest you dont " do your own thing " even if you think you 100% know what you are doing You really dont want to tangle a-holes with the gas company or they can really make things a lot more difficult for you if they feel...
  7. Master Plumber Mark

    New gas service. Can we get meter turned on with capped/ pressure tested only?

    I think I would call the gas company and make sure of their requirements. and not go by what I have heard or been told.. Every gas line we have ever cut and run in a new home always just stubbed it out the side of the house..... The gas line was eventually run to that location but the meter...
  8. Master Plumber Mark

    Hot Water Heater Outside Backdraft Options?

    Just throw another 45 on that line and point it down towards the ground.... maybe put a short nipple into the end and extend it downwards aabout 4 inches I would not worry too much about snow and you can always keep an eye on it you wont have a condensation problem and if you look on top of...
  9. Master Plumber Mark

    Old 1920s. Sibley toilet held - can I buy a new pipe that connects the bowl to the tank

    good luck with that project...... Installing those old toilets is a lost art, I suggest you measure 3 times at least and then cut to size maybe mark the wall where you are going to mount the tank first and then set everything in place just to be sure.......... Maybe you should buy a couple of...
  10. Master Plumber Mark

    Need a machine for my truck.

    Removing old heaters is easy peasy... with an Escelara staircat stair climber... its really no big deal... I do them all the time Dragging a spartan cable and machine up and down a flight of stairs is not fun and grinding on roots in a sewer in someones clean basement will melt your mind...
  11. Master Plumber Mark

    Need a machine for my truck.

    If you are doing drain lines in a home I would get the Rigid K50 which is good for about everything... Or you could get the K60 which is supposed to be good enough for main lines too... I have never cared for main line sewer work because it is just too much heavy lifting ...
  12. Master Plumber Mark

    How to join HP PVC Water pipe when must insert a piece?

    The plastic dresser coupling I bought for the 1 1/4 pipe I was dealing with was rated for up to 300psi... So i dont think you are gonna have an issue with it
  13. Master Plumber Mark

    How to join HP PVC Water pipe when must insert a piece?

    that maybe would work fine too. but I am not sure if one inch sch40 pvc will actually slide into that fitting or not. I dont think it is the same outside diameter........ I know if it is one inch CPVC the sharkbite would work fine because I have done it before but I dont think it will fit...
  14. Master Plumber Mark

    How to join HP PVC Water pipe when must insert a piece?

    I just went through this kind of trouble on tuesday with my belly laying over and down in a 3 foot deep ditch... I attempetd the same thing but their was not enough wiggle room with the 1 1/4 pvc pipe I was working with buried in mud , and it did not go well... so I had to start over and...
  15. Master Plumber Mark

    PRV/100psi/Hot Water Heater

    100 psi is fairly high for the house... it does put a lot of stress on the fixtures.. for the irrigation system its not necessary at all.. you have done fine with the heater so far but its time is running short for sure... installing a prv for your house is not a bad thing to do and crank it...
  16. Master Plumber Mark

    Underground PEX questions.

    I would just use Armaflex ... I have seen it painted with latex paint too their is not supposed to be much chlorine or chlormines in the city water too... but that percentage changes with the seasons so you wonder how long its gonna be and its a race to see if it wears out from the inside...
  17. Master Plumber Mark

    Underground PEX questions.

    black gorilla tape.... that should do the trick..... all this stuff is gonna eventually degrade due to the chlorine in the water,,,, its just a matter of time...you can wrap it, sleeve it , paint it.... it is not gonna matter... I give the stuff 35 years at the most and time is running...
  18. Master Plumber Mark

    1930 Central Brass lawn faucet bonnet packing dome shaped washer replacement

    Good luck with this repair.... I hope you have a shut off to this valve inside the home just in case the patient dies on the table and it cannot be repaired ..... Hopefully the seat body is still in good shape and it is salvageable.... you can easily replace the washers but that is only half...
  19. Master Plumber Mark

    now have 25 employees

    People are morons and do not have a clue about much.... I think we both know how helpless most of the population actually is..... so what is the deal with you lately?? you are never on here all that much and now you seem to have lots of time on your hands.... are you totally retired now??
  20. Master Plumber Mark

    Should I replace 45 year old, 1/2" copper under slab?

    How do I tell if the current pipe is L or M, considering there's not much exposed about the slab? all copper underground is either L or K soft copper about 99 % of the time... I have never seen M hard copper under concrete
Back
Top