Search results

I'm putting a bathroom fan in a basement bathroom. The only good location for the exhaust vent (aka wall cap) is the exterior wall not far away. But in that approximate location there is already 1) a 4-ft wide x 1 ft high basement window and 2) a passive fresh air intake wall cap connected to an...

Thanks. After a lot of research, it seems most of the current Wellworth tanks use the Pressure-Lite flush design - which apparently are not compatible with my 2018 Wellworth Classic bowl. In this part of Canada, it's the newer Pressure Lite tanks that can be found for around $150 - but the...

I have an ABS toilet flange in need of repair - the slots in the flange that hold the closet bolts have partially broken. My repair ring is the Lasco 33-3736. It looks very similar to the Harvey 014710. Are these meant to be installed over or under the flange? On my Lasco, the packaging...

Thanks- it's a 3-bolt connection between tank and bowl. So any new Wellworth 3-bolt bowl (round or elongated, standard or comfort height, 1.28 or 1.6gpf) will work /flush properly ? I compared prices and bowl-only is $200 less than an entire Wellworth toilet - the reason I'd prefer to replace...

I have a Kohler Wellworth 1.28gpf toilet which was bought in 2018. I need to replace the bowl - it's model K-4197-0 round bowl. The tank is K-4436. Do I need to replace the bowl with the exact same model or will any other Wellworth bowl work with my tank - either round or elongated? The K-4197...

I have a Kohler Wellworth toilet bought in 2018 in Canada. I need to replace the bowl only. I can't find a model number on the bowl but I did find the UPC-type code on the underside. Customer service said the bowl is K-4197-0 (white). It's round format. My tank is K4436 (also white), 1.28gpf...