Rotaris
If its not broke, fix it until it is!
Everytime I remove the head off of my Iron filter tank, the riser tube sticks and lifts my tube up.
I have applied some plumbers grease to prevent. Does not help
I then have used compressed air down the tube to help re-seat it. Still sticks up a 1/4 inch above the tank.
Hope this is o.k.?? I know its supposed to be flush. The best I can get??
Clack valve 10x54 tank.
Any tips and tricks to install without removing media?
Thanks
I have applied some plumbers grease to prevent. Does not help
I then have used compressed air down the tube to help re-seat it. Still sticks up a 1/4 inch above the tank.
Hope this is o.k.?? I know its supposed to be flush. The best I can get??
Clack valve 10x54 tank.
Any tips and tricks to install without removing media?
Thanks