Whats Minimum distance of ptrap to santee?

Users who are viewing this thread

Nanmer

New Member
Messages
17
Reaction score
1
Points
3
Location
Texas
Does anyone know whats the minimum distance between the ptrap to santee that is in a vertical position in ipc code? I think upc is 2 times pipe diameter can't find ipc minimum.
 

Reach4

Well-Known Member
Messages
38,798
Reaction score
4,412
Points
113
Location
IL
IPC 906.3 Crown Vent. A vent shall not be installed within two pipe diameters of the trap weir.
 

Nanmer

New Member
Messages
17
Reaction score
1
Points
3
Location
Texas
IPC 906.3 Crown Vent. A vent shall not be installed within two pipe diameters of the trap weir.
So,does that mean that anything within the two pipe diameters is called a crown vent?
 

Nanmer

New Member
Messages
17
Reaction score
1
Points
3
Location
Texas
Somebody else please chime in.
So,does that mean that when your venting a ptrap anything within the two pipe diameters is called a crown vent? I say yes. Doesn't matter if its the tee in the vertical or tee in its back.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks