Fleck softener not showing proper water usage

Users who are viewing this thread

Reach4

Well-Known Member
Messages
38,796
Reaction score
4,412
Points
113
Location
IL
Every night at 2am the softener asks if it has enough capacity remaining to make it thru the next day. If not, it regenerates. The RS is reserve setting. rc says use RC (reserve capacity) in gallons. RS=sf is safety factor in percent.

They do the same thing... define how much reserve.

The display number counts down to zero. If at 2 AM, the display says 3, it waits until the next day to check again. So the number does not include the gallons that are in the reserve.
 

Dan Bixler

New Member
Messages
16
Reaction score
0
Points
1
Location
Minnesota
Yes. Sorry. I see my mistake now. I changed sf to rc and set the reserve to 120. All the other settings are set to what you posted.
 

Dan Bixler

New Member
Messages
16
Reaction score
0
Points
1
Location
Minnesota
Thanks a ton for your patience and insight. I was quite frustrated with what the settings should be.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks