Frost free faucet stem replacement (Watts manufacturer)

[Erik D]

Hello all,

I've been looking everywhere for a replacement to my frost free faucet stem. I can't find the match anywhere. I've tried others, but they don't fit. Replacing the entire faucet would be difficult as it is encased in spray foam on the inside of the house.

Here are some pictures. It's about 15.5" total length.

Thanks in advance!

Erik

 

[Terry]

Most plumbers show up with a new frostfree. Measure where the connection in the wall is, cut the wall there and replace with a new one. I use a 7" x 7" pop in panel to cover the square hole I cut. I did one last week that I had replaced two years ago. It was so much quicker the second time with the access panel there. Hoses left on in Winter was the issue there.

 

[Sponsor]

 

[MP_MKZ]

I use these. I order then from Amazon. All Watts stuff is Prier now. I am not a plumber just like to help people. The copper parts are all good. It appears you just need the gaskets and such. The kit has it all.

https://www.amazon.com/dp/B000LNPEI...t=&hvlocphy=9005112&hvtargid=pla-313308519246

 

[WorthFlorida]

Try here,
http://www.watts.com/pages/_products_details.asp?pid=732

 

[Smooky]

https://www.griggindustries.com/page1206.html