Recent content by yellbird

Just wanted to Thank everyone for replying. Was able to turn spout and release it from water pipe but nut kept spinning with it so couldn't pull spout out. Ended up cutting small hole in wall removed and replaced spout. Thanks again for all the advice.

About the same as my first reply, looks like I will go buy lotto ticket to see if I am lucky Ha. Thank you very much for replying.

Thanks for your fast reply, I figured that would be about the best I could ask for, looks like I will purchase of of those hole covers before I start messing with it. The spout has a half dollar sized polished brass chip messing from the top but it works fine other than that. Thanks very much

I was hoping some would read these pdf files and let me know if I could just unscrew this spout and install new one, if not I would have to cut hole in wall to get underneath tub. Thanks for any advice

That is the correct one and after looking at the price I will look for something else to replace it, What do you think the odds are that I can just unscrew it without cutting the wall next to it and get a wrench on the bottom bolt?/ Thanks to everyone who commented.

Thanks for your quick reply, it is not necessary to replace it with the exact same one, more concerned about getting it off. There is a wall between it and the closet so I guess I will have a cut a hole in the wall?

I was hoping someone could identify this faucet that is on a Whirlpool Jet Tub. As you can see it is damaged and would like to replace if I can. Also how does it come off as it has no screws and have no way to access it from underneath. It is 10" high and 3 1/2 " wide at the base. Thanks...

Maybe someone can help me. adding pic may help I have a 2 piece 21 year old Porcher with the button on top of the tank.. The flush valve went bad and I removed it. I called Porcher and the person I talked to couldn't figure out what model I had but she sent me a flush valve she...

Maybe someone can help me. I have a 2 piece 21 year old Porcher with the button on top of the tank.. The flush valve went bad and I removed it. I called Porcher and the person I talked to couldn't figure out what model I had but she sent me a flush valve she thought would work but it was way...