Recent content by TURBOSCHILZ

  1. TURBOSCHILZ

    HELP ME with this pipe size...

    Originally I hard purchased a 3/4" and 1" barb fitting, but of course the 1" was way too big, the pipe could probably fit thru the middle of it...lol The size difference is VERY minor, but it is enough to cause a slight leak around the 3/4" barb... Thanks for all the help Don, you do the same...
  2. TURBOSCHILZ

    HELP ME with this pipe size...

    Thanks for the info Don, I've been looking thru it, but have yet to find anything out of the ordinary, but will keep looking... Thanks again for all your help...
  3. TURBOSCHILZ

    HELP ME with this pipe size...

    I took in a chunk to the hardware store, no luck as of yet... Even though it appears to be standard 3/4" poly, it obviously is not... We took some calipers to it, standard 3/4" came in at JUST under 1" OD, this guy came it at just over 1" OD... Pretty frickin weird...lol Anyone ever heard of...
  4. TURBOSCHILZ

    HELP ME with this pipe size...

    Ya I've repaired many of them in the past, and they're always a really tight fit, I've had to heat them up or pound them in with a hammer in the past...lol Not sure why they fit so loosely on these pipes, the pipes have to be some weird off size, it's driving me crazy...lol Like I said, I'm...
  5. TURBOSCHILZ

    HELP ME with this pipe size...

    I am using poly barb fittings, they are the gray 3/4", but are just barely too small that the water leaks around them, they slide in and out quite easily, I've clamped them, I've tried gluing them, but no luck... I'm thinking I need like a 13/16" barb fitting, do they make such a thing?...
  6. TURBOSCHILZ

    HELP ME with this pipe size...

    Oh alright, that is a definite probability then, is CPVC a common item, would finding peices for it be simple?... Otherwise, other than the minor size difference, it's black, you can tell that it came off a roll, just like what's in Home Depot, but once again, not a pro, so really have no...
  7. TURBOSCHILZ

    HELP ME with this pipe size...

    Hey fellas, I'm new to the site and have an issue that I could REALLY use some help with. I've recently purchased a home and it has an older sprinkler system, probably 80's I'm guessing. I've gotten the system into 100% working order, the only problem is that there are 3 lines that need repairs...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks