Recent content by tate16t

Hi all, When turning on and when the zone finishes watering I hear a knocking noise. I can hear this inside my home. It sounds like pipes knocking, I’m not sure. What are some of the items I can check? Thank you.

I’m back in business. What I called an inlet PVC pipe was the outlet from the AC unit. That was replaced including the EZ trap.

I believe I found two problems. The drain inlet PVC pipe broke right at the AC connection. Also, as I suspected I can see debris in the pan from the roof work that is likely clogging the drain outlet. :(

Hey guys, I came home this evening to the sound of dripping water. My home central AC unit was dripping water inside the return. I removed the filter and saw water dripping. There was a small puddle. I turned the unit off and called for service. I’m curious what can cause this to occur. Can...

Thank you.

I got lucky and found it at HD. It’s the Glacier Bay model, HD67732W-6A01. Here’s the link, https://www.homedepot.com/p/309670492 Thanks

I don’t recall the brand and model number. It was purchased a few years back. The connector does appear to thread out but the location of the connection is far into the body of the faucet making it impossible to do without a tool of sort or taking it apart. I will search a little more for the model.

Hello all, I have a bathroom faucet similar to the one below. The faucet connector cable is screwed inside the bottom of the faucet, pretty far within the body. One of the connectors needs to be replaced. Is there a way to access the connector so that it can be unscrewed and replaced? Thanks

I have a Kohler kitchen faucet. It has 3/8” supply hoses running from the faucet under the sink, one looks like this...

thank you!

Hey guys, I would like to verify the process to winterize my sprinkler system. I have done this previously with my air compressor but had my backflow preventer replaced which is very different from the previous one. Attached is a link to a pic of my backflow. Can someone assist me with the...

Hey guys, My home condenser fan stops running after 15 minutes or so. I installed a new motor and capacitor and I still have the same issue. I also noticed today the larger copper pipe to the condenser does not get cold. What might be the possible causes?

What do they process it with? So you're basically putting garbage on your lawn? Does this invite other issues?

Does Virgo have a Lawn Food like Scott or can I simply use Scott Lawn Food at any time?

Thank you. I will add the back flow valve.