Recent content by SoftenerNewbie

  1. SoftenerNewbie

    Need help with Brine & Slow rinse time calculation

    Finally heard back from Runxin so sharing info here, in case anyone else runs into this issue: For each injector (depending on the tank size): Brine injection rate = Total Flow Rate - Slow Rinse Flow Rate (Water) So for Blue injector. Total Flow rate during Brine and Slow Rinse is 3.99...
  2. SoftenerNewbie

    Need help with Brine & Slow rinse time calculation

    Would really appreciate if someone can help me with calculations, as its been a few days and I'm totally lost. I feel like I'm doing it right but numbers don't make sense.
  3. SoftenerNewbie

    Need help with Brine & Slow rinse time calculation

    Runxin Up-flow regeneration valve: https://www.run-xin.com/upload/20190627/153734581337.pdf Purolite C100E Resin: 2.5 cu-ft in 13x54 tank According to resin datasheet, I need 0.25 - 0.5 gpm/cu-ft of Nacl/Brine injection. That means at 5 liters/min, the required brine (calculated at 8lb/cuft)...
  4. SoftenerNewbie

    Water softener sizing for changing water usage

    Valve: https://www.run-xin.com/en/content7_372.htm Manual: https://www.run-xin.com/upload/20190627/153734581337.pdf My main concerns are: 1. Is 13x54 with 2.5cuft resin enough for 7 person household, while being set for low salt usage? 2. The injector they sent me is Yellow/orange looking. In...
  5. SoftenerNewbie

    Water softener sizing for changing water usage

    Been reading articles online for past few days but still can't makeup my mind about which size softener to get. Water hardness: 300ppm = 17.5 gpg Min people in house: 7 people Guests: Every 2 months or so we get 2-3 guests that stay 2-3 weeks. The valve is Up-flow regeneration metered Runxin...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks