Recent content by sbeausol

  1. S

    Double fixture fitting - sink next to washing machine standpipe

    I am renovating a room in which I plan to place a washing machine with a sink next to it. I'm curious if it is possible for these two fixtures to share a vent through a double fixture fitting? The alternative would probably be something like this: Input is appreciated!
  2. S

    Laundy room/mudroom

    Laundy room/mudroom vent question I'm in the process of moving my washer/dryer from the basement to the first floor. My initial design for DWV doesn't look like it will work because for some reason there are a few extra studs. The plumbing shown is on an exterior wall. Here was what I had...
  3. S

    Upgrading very old pressure tank

    Yes my goal is to try to get a broad view on the problem I hope to solve, so I've cross posted in a few areas. In my experience, different sites seem to harbor different biases. Since my pump may not meet my longterm needs, I would prefer to buy a system that can scale with those needs. I'm...
  4. S

    Upgrading very old pressure tank

    I'm confident the tank is on it's last legs... for those interested, this is what I'm dealing with: Pump control box: Pressure switch:
  5. S

    Upgrading very old pressure tank

    I'm one year into a new house we bought that was built in 1971. Water is served from a well that I don't have a lot of specific info on. In 2010, there was a 1/2 HP Goulds submersible pump model 5gs05 (5GPM) installed set at 300' using 1" poly. I spoke to the installer and the only extra detail...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks