Rocklin662's latest activity

  • Rocklin662
    Rocklin662 replied to the thread New CSV install.
    My sand seems to come and go. After pumping 5000 gallons into the pool, it seems to have cleared. So I do not really know.
  • Rocklin662
    Rocklin662 replied to the thread New CSV install.
    Yes it is 20 GPM Pentair, but I do not know the model. Will find out and post next week.
  • Rocklin662
    Rocklin662 replied to the thread New CSV install.
    Pentair P43B0020A2 motor, chart shows service factor is 12.2 amps.
  • Rocklin662
    Rocklin662 replied to the thread New CSV install.
    I use emonTX to collect and an emonPI board on a Raspberry Pi single board computer running Emoncms. That data is sent to the home...
    • 1652971806086.png
  • Rocklin662
    Rocklin662 replied to the thread New CSV install.
    After some adjustments to how the sprinkles run. At 5 am measured 9.2 amps with Fluke 87 and i410 clamp. My estimate for the 4:15 time...
    • 1652969610305.png
  • Rocklin662
    Rocklin662 replied to the thread New CSV install.
    Irrigation starts at 4 AM. Quite a few less cycles with the CSV. Zones 3 and 4 can be combined to run at the same time. Not sure about 5...
    • 1652883691507.png
    • 1652883768033.png
    • 1652883997201.png
  • Rocklin662
    Rocklin662 replied to the thread New CSV install.
    Actually had to change some pool water due to too much CYA and too little rain over the winter. Since I did that the sand seems to be...
  • Rocklin662
    Rocklin662 replied to the thread New CSV install.
    Well info: Pump 2 HP 20 GPM Drop Pipe 1 1/4' schedule 80 Static Water 125' Well Depth 197' Pump:180 180'
  • Rocklin662
    Rocklin662 replied to the thread New CSV install.
    Sometimes get some black sand. My homemade sand trap.
  • Rocklin662
    Did my CSV valve install today. Went pretty well. The instructions that came with the valve were concise and easy to follow. The large...
    • 1652474003323.png
    • 1652474519644.png
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks