Recent content by Rerod

I am reading in more than one place that this is the case. I do maintenance in a building that was built in 1912 and we are in the process of switching toilet diaphragms to 1.6 gallons per flush when the old 2.4 diaphragms fail. I’m trying to warn management that this is a bad decision but...

Thanks folks.. No typo.. 10,000 sq foot roof will be a agricultural canopy roof with no walls. Underneath will be my shanty town. But in order to retain my low property taxes, I thought the living quarters needed to be moveable or non-permanent like on skids which I was planning. But it...

OK, but does the mini split stat allow me to lock in the lowest compressor speed/tonnage, regardless if it runs 12 hours straight set to 71? I think the logic will want a set amount of "cycles per hour".. I prefer to have AC sized where the inside temperature drops 1/2 - 1/4 degree per hour...

Yeah.. But mine will be a 10,000 sq' canopy roof. 9000 btu is to much cooling and I don't want a smart stat thinking it knows better than me. I think I will try the window shaker hack for my super efficient studio. Where you duct it in to isolate it on the ground..

But 9000 btu mini split would be over sized, and any 6000 btu I can find is more $..

I haven't even designed the home, and also wondered if it could be reverse sized. Meaning given a certain piece of equipment, like the 6k Mitsubishi you mentioned, how large of a PGH or pretty good house could one cool? (R20 floor/40 walls/60 ceiling) I don't really agree when you say mini...

Thanks. If I could find a inverter mini split that could actually dial back from 30k heat to 9k cool. I might consider one.. But I'm reading allot of complaints about symptoms of being over-sized like poor humidity removal and musty, moldy smells from the unit.

I just don't want the reversing valve and related components failing, if I plan on heating with propane.. Does anyone know of a brand that is only cooling? Thanks

Yes don't immediately throw more tons at the issue.. A properly sized AC runs continuously on the hottest days of the year.

Old thread.. I just wonder why no one makes a decent mass produced stainless shower receptor/base and enclosure? Sinks and counter tops are popular. Keeping up with the joneses and planned obsolesce..

Thanks Thanks Mike. No, I'm not reinventing the wheel and considering a complete SS kit. The Onyx 54" shower tray/pan is the closest I can find to my 57" space. So I was leaning that direction since they offer a complete kit. But I'm disappointed that the Onyx collection has a sealer...

Thanks Terry. Doesn't cultured marble have a clear coat on it? Id like to have something that is sand-able/buff-able for when someone who's renting my home leaves a stain. Jim and Mike.. Im not throwing the my tile consideration out the window yet.. But asking about solid surface over on...

Just to give you a idea how I roll, I just bought a pair of speed queen's after my Maytag commercials failed after 18 years. So I'm the type who's not afraid to spend money for something that should last decades. I'm not wealthy, but I think it pays in the long run. I bought my fixer-upper...

I realize this is a old thread.. But I need to drill this same hole, except through 10" of poured. Maybe I should rethink this and go up through the ceiling and out in a joist space instead.

Funny I havent replaced mine yet. They just keep running. But looking for parts for a panasonic fan brought me to this thread. Long story short. Panasonic wants $50 to send the poor guy a knob that was missing to begin with.. What a crock!