Recent content by racerc20

OK went down and cleared a bunch of rusty brown black water from the upper drain after the low water cutoff...then i removed the pig tail has a union on it so was easy to get out...clogged solid to the pressuretrol...i took a piece of 12ga coppe wire and ran it through the pig tail as far as i...

dont know ill check later.

Ok all at the end of last years heating season my pressuretrol took a dive and would only work if i banged on it or played with the adjustment. I found a brand new one at my local supply house and replaced it tested it and all seemed good. Before the system was fired this year I drained the...

thank you all i will keep the feed then on the cold supply side... thank you Racer

Thanks jad...in my opinion a cold water shot going into the bottom of the furnace it seems to be piped into the return side of the system so it should be ok...i need to swap out some leaking valves for him so i wanted to know if i need to change the supply feed from his cold to hot... thanks...

Hi all new here and new to major plumbing...im a DIY er with some good skills but not all the info...anyway... a friend recently purchased as house with steam heat... his well mclain furnace has an auto feed plumbed into it... but something seemed odd...The supply source for the feeder is the...