Recent content by pmizell

Perfect, thanks HJ!

Googling a little more, I found a picture -- this is the diverter tee at this site: http://faucetsblog.com/price-pfister-sub-assembly-diverter-tee-951-029/

I can feel the plastic ring. I pushed up on the tee, and tried to pull down on the ring (wore gloves to get a better grip) but I can't get the plastic ring to depress. The water was turned off. Any last thoughts before I break down and call a plumber? Thanks again for all your help.

The diverter tee on mine does not have a clip. I have felt all around, and it is a totally different connection, so it isn't like the clip just isn't in there. Mine is metal, the breakdown online is a black plastic tee. The replacement parts list a plastic and a metal tee, but only show an...

It is a PP "Marielle". The online instructions show a plastic diverter with a removable wire bracket on top. Mine is metal, no top bracket. It is hard to reach, and I can't see the top, so I don't know if it screws out with a wrench (there is a flattened area for a wrench), or if you push it...

I have a single lever faucet, pullout spray. I have a diverter issue (water doesn't come out of the faucet strong unless you "pop" the sprayer). I have turned off the water, and I can remove the bottom hose coupling and the side hose coupling. How do I remove it from the top coupling? The...

Thanks Upper, that worked. Appreciate it. This is a great forum.

Thanks. I didn't realize the programs run consecutively if they are on.

Sorry, I have scoured the internet to try and figure this out and can't. I have a new Rainbird ESP Modullar Controller. It has three programs, A, B, C. Six zones. I want the zone for my flower bed to go off every morning during the hot summer months here in Houston, and I want the all...

The owner came out today, fixed it. He was very apologetic. Everything's good.

Let me be more clear. In all my research, I remember a post about using care when screwing back in the pilot tube, main line, or T/C. Pretty sure it was the pilot tube. Question for anyone (since I have 6 people wanting to take showers in the morning): If I am reasonably adept, is it...

Thanks. Reminds me of the old Elton John song, Someone Saved My Life Tonight (and a wife and four kids!) Next question -- I feel pretty confident I could pull the assembly out myself and add the orifice, but I have heard it can be delicate screwing the connections back in to the gas valve...

Done -- thanks for the fast advice!

I had the same problem with my American water heaters as described in the Whirlpool thread (same mnfctr as all know). Asked for two new gas valves and manifold assemblies. No questions asked, they were overnighted for 20 bucks. I was actually pleased with the customer service. The manifolds do...