Recent content by ONLYM

  1. ONLYM

    Dornbracht MEM Pressure balanced valve trim with integral diverter problem

    I figured this out after a plumber came and told me my cartridge was bad. The hot and cold valves on the rough in must be set properly to open otherwise the diverter will not have enough pressure to open or stay closed. Once I adjusted the hot and cold valves to open the diverter which must be...
  2. ONLYM

    Dornbracht MEM pressure balanced valve trim with integral diverter problem

    Does anyone know how to engage the diverter. Mine seems to have a problem and there seems to be a trick to it. Do you pull or push the diverter. http://www.dornbracht.com/en/product...id=227&lfnr=5#
  3. ONLYM

    Dornbracht MEM Pressure balanced valve trim with integral diverter problem

    Does anyone know how to engage the diverter. Mine seems to have a problem and there seems to be a trick to it. Do you pull or push the diverter. http://www.dornbracht.com/en/products/prod_dtl_zoom.htm?id=4093&cid=227&lfnr=5#
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks