Recent content by Go_Habs_Go

Thanks for the reply, here are some additional photos. The drain is a lead toilet sleeve that is still closed at the top. Drain is 4" across and about 1.75" above the tile. The plumber said he would come back once the floor was tiled to cut the top of the pipe and install the flange. Agree that...

Hi all, I'm in the middle of a full bathroom reno and just had the bathroom tiled. The tiler left a bit of a gap around the toilet drain (see photos) because he thought the plumber would install the flange directly to the sub-floor as opposed to on top of the tile. I explained that the plumber...

Thank-you. The Viega PureFlow seems to be Pex-B and 6x the OD from what I've read.

Hi, I had some old copper supply lines replaced with Viega PureFlow Pex. Some of the pex had to be bent. The lines that come out of the floor to supply a sink and laundry machine have a fairly smooth bend that seems fine to me but the part for the toilet supply line has a smaller radius. I...

Technically it is underground...sort of. This is under a crawl space. I could cover it with some dirt or gravel. Is that what you mean by underground or do you mean buried in cement? Here's a better photo. Honestly I think the better fix would be replacing the entire length of the cast iron...

Thanks, here is a picture of the 45 (my photos were removed from my original post probably because they were too big, hopefully these ones will show) Here is the wetness around the fernco. Does it just need to be tightened or was it not installed properly?

Hi! I had a leak in the cast iron drains in the crawl space under my laundry room. Floor was opened up and all drains replaced by a licensed plumber. He also replaced some of the copper water lines with pex as we are repositioning the fixtures (laundry, sink, etc). I would like some...