CommanderDave's latest activity
-
CommanderDave posted the thread Geothermal vacation setting in Solar and Geothermal Water Heating Forum.I have a water to water open loop pump and dump geothermal system. When I go on vacation this summer I would like to shut the water off... -
CommanderDave replied to the thread Timer Installation.I will look into that. Also what about something like this that's digital, I'm assuming it's two pole. I could wire it direct to L1 and...
-
CommanderDave replied to the thread Timer Installation.Yeah, that's what I kinda thought too. I did see a configuration like this, but again how to also make the pressure switch connection...
-
-
CommanderDave replied to the thread Timer Installation.No worries. This is what I originally posted. I have a ST01 timer on hand. Black - Line Blue - Load Red - 3 way (not used) Green -...
-
-
CommanderDave replied to the thread Timer Installation.10:22 am today Valveman "I still do not understand if you have two pumps or just two pressure tanks?" 10:44 am today My Response: "I...
-
I want to install a timer to control a well pump located at a pond on my property. I've installed a diagram showing the electrical...
-
-
CommanderDave replied to the thread Timer Installation.As I keep saying I have two wells, each with their own pressure tank, one for the house and one for the pond. The pond well and...
-
CommanderDave replied to the thread Timer Installation.I keep the handle for the hydrant open from early Spring through end of Summer, that's how I used to run water through it with a timer...
-
CommanderDave replied to the thread Timer Installation."I still do not understand if you have two pumps or just two pressure tanks?" I have two wells each with their own pumps, one for the...
-
CommanderDave replied to the thread Timer Installation.I do have two tanks, one for the house and one for the pond. However, they are plumbed together with a shutoff valve in the event one...
-
-
CommanderDave replied to the thread Timer Installation.So in my configuration the cycle stop valve would have to be mounted at the wellhead, since the pond pressure tank is located in my...
-
CommanderDave replied to the thread Timer Installation.I have 2 separate pressure tanks, one for the house well, and one for the pond well.
-
CommanderDave replied to the thread Timer Installation.I understand your response. However, the pond pressure tank was just recently installed. Prior to that the pond well pump was just in...
-
CommanderDave posted the thread Timer Installation in Pumps and Tanks Well Forum & Blog. Water is life..I'd like to know if it possible to install a 240 volt ST01 timer in the diagram below. The timer wiring is: Black - Line Blue - Load...
-
