Recent content by BobGimley

So... I have installed the new parts this morning, which consisted of injector, piston and stack. I did the injector by itself and had no luck. Then the stack and piston. Comparing the two stacks and the rubber seals, the new rubber seals were nice and round, while the old ones looked quite flat...

Thanks for the responses. I originally had the drain line rising +/- 4' overhead, but changed that around last week, and it now drains to a floor drain and is hard piped, so there are no pinches, Based on the amount of water it blasts out in the rinse and backwash positions, I am guessing that...

Hi all, New to the forum and thanks for your help in advance. I have a clack WS1 system that I bought(used) and installed. I am having issues with the suction/draw from the brine tank. I have dismantled, cleaned and reassembled every part that will come off of this thing, yet it will still...