Sokolq55
Member
My original bathroom sink drain is not centered and the new vanity would need quite a bit of mods to make it work
So I want to just move the drain. Can someone confirm what I have in the picture will work? I would remove the original drain tee, put in a new one but rotated left, run a short piece of 1-1/2 pipe and then have a 90 drain to sink connector come out of the wall right next to that left stud. Everything will be on the same level - ie that 90 is coming out of wall horizontally….just hard to draw it that way.
Will this work? Particularly thinking if I am messing anything up with the vent by putting in that 90.
Thank you!
So I want to just move the drain. Can someone confirm what I have in the picture will work? I would remove the original drain tee, put in a new one but rotated left, run a short piece of 1-1/2 pipe and then have a 90 drain to sink connector come out of the wall right next to that left stud. Everything will be on the same level - ie that 90 is coming out of wall horizontally….just hard to draw it that way.
Will this work? Particularly thinking if I am messing anything up with the vent by putting in that 90.
Thank you!