Fleck 7000 SXT settings

Users who are viewing this thread

EE_Water

New Member
Messages
4
Reaction score
0
Points
1
Location
59828
I like to get an opinion if my water softener settings are correct. The injector color is violet.

System info (not programmed)
salt lb/cuft: 8 ;
BLFC: 0.125 ; Brine Refill rate GPM
cubic ft resin: 1.5 ; ft3 resin
Raw Hardness: 18 compensated (well water)
Estimated gal/day: 240 gallons
Estimated days each regeneration: 6.7

Fleck 7000SXT Settings:
DF = Gal - units
VT = dF2b - DownFlow, double backwash
CT = Fd - Meter Delayed regen trigger
C = 36 - capacity in 1000 grains
H = 18 hardness grains after compensation
RS = SF - Safety Factor
SF = 20 - percentage of reserve
DO = 14 - maximum days override
RT = 2:00 - Regeneration Time (default 2 AM)
B1 = 8 min - Backwash 1 (minutes)
BD = 120 min - Brine Draw (minutes)
B2 = 5 min - Backwash 2 (minutes)
RR = 10 min - Rapid Rinse (minutes)
BF = 32 min - Brine Fill (minutes)
FM = t1.2 - Flowmeter type
 

Reach4

Well-Known Member
Messages
38,795
Reaction score
4,413
Points
113
Location
IL
I expect to make some changes in the recommendation. What injector number or color do you have?
 

EE_Water

New Member
Messages
4
Reaction score
0
Points
1
Location
59828
The injector color is violet which matches the 00 sticker on the unit.
 

Reach4

Well-Known Member
Messages
38,795
Reaction score
4,413
Points
113
Location
IL
The injector color is violet which matches the 00 sticker on the unit.
Cool. I hope you are right and it is not blue. A #00 Injector - Violet should draw the brine in about 27 minutes, vs about 9 minutes for blue.

System info (not programmed)
salt lb/cuft​
:​
8​
;​
A choice ( efficiency vs capacity)​
BLFC​
:​
0.125​
;​
Brine Refill rate GPM​
cubic ft resin​
:​
1.5​
;​
Same as (nominal grains/32,000)​
Raw hardness​
:​
16.4​
;​
including iron etc​
Estimated gal/day​
:​
300.0​
;​
60 gal per person typical calc​
Estimated days each regen​
:​
6.7​
;​
presuming days each use reserve capacity​
Fleck 7000SXT Settings:
DF​
=​
Gal​
;​
Units​
VT​
=​
dF2b​
;​
Downflw/Upflw, Double Backwash​
CT​
=​
Fd​
;​
Meter Delayed regen trigger​
C​
=​
36.0​
;​
capacity in 1000 grains​
H​
=​
18​
;​
Hardness grains after compensation​
RS​
=​
cr​
;​
Cr = base reserve on recent experience​
CR​
=​
0​
;​
0 is default (leave it)​
DO​
=​
14​
;​
Day Override (typ 28 if no iron/Mn)​
RT​
=​
2:00​
;​
Regen time (default 2 AM)​
B1​
=​
8​
;​
Backwash 1 (minutes)​
Bd​
=​
100​
;​
Brine draw minutes​
B2​
=​
5​
;​
Backwash 2 (minutes)​
RR​
=​
6​
;​
Rapid Rinse minutes​
BF​
=​
32​
;​
Brine fill minutes​
FM​
=​
t1.2 (usual)​
;​
t1.2 is default flow meter​
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks