NeedPlumbingHelp
Member
You will have to click the picture to see the pipe that is saddled on.
Hello. I’m trying to repipe underneath two toilets, a shower, and a sink.
The picture is through the ceiling upward.
I have already replaced some pipe, and plan to remove the pictured Fernco fittings with more replacement pipe. My questions are…
1. Is there any way to replace the tee on the horizontal run with a wye? I know tees aren’t for horizontal runs, but I don’t know how to put a wye in with the limited drop between the toilet directly above to the horizontal run.
2. There is a 1 1/2 inch vent line between the vertical piping and the horizontal run. It appears to be saddled on somehow to each line. Do I need to duplicate those saddle attachments in PVC form, or is there another way to do the venting that would be more efficient/easier, when doing my pipe replacement from ABS to PVC?
Thanks in advance.
Hello. I’m trying to repipe underneath two toilets, a shower, and a sink.
The picture is through the ceiling upward.
I have already replaced some pipe, and plan to remove the pictured Fernco fittings with more replacement pipe. My questions are…
1. Is there any way to replace the tee on the horizontal run with a wye? I know tees aren’t for horizontal runs, but I don’t know how to put a wye in with the limited drop between the toilet directly above to the horizontal run.
2. There is a 1 1/2 inch vent line between the vertical piping and the horizontal run. It appears to be saddled on somehow to each line. Do I need to duplicate those saddle attachments in PVC form, or is there another way to do the venting that would be more efficient/easier, when doing my pipe replacement from ABS to PVC?
Thanks in advance.
Attachments
Last edited: