davelowry17
New Member
Hello!
I'm installing the Delta MultiChoice Universal Shower Valve Body Rough-In Kit, Model #R10000-UNBXHF. The finished trim is the Delta Vero 1-Handle Shower Only Faucet Trim Kit in Stainless, Model #T17253-SS.
The shower side wall consists of Kerdi board that will be tiled.
The plastiguard, included instructions, plus info on this forum have me all set for setting the correct +/- depth to the "finished" tiled surface.
Questions -
I'm installing the Delta MultiChoice Universal Shower Valve Body Rough-In Kit, Model #R10000-UNBXHF. The finished trim is the Delta Vero 1-Handle Shower Only Faucet Trim Kit in Stainless, Model #T17253-SS.
The shower side wall consists of Kerdi board that will be tiled.
The plastiguard, included instructions, plus info on this forum have me all set for setting the correct +/- depth to the "finished" tiled surface.
Questions -
- Does the plastiguard for this Delta Rough in Body stay on or do you remove prior to final installation?
- The Schluter KERDI Board also includes a 4 1/2" dia round mixing valve seal. Do most of you cut a 4.5" hole, centered on the valve body and use the provided seal for this application?
Last edited: