Removing this Moen Concentrix shower handle

Users who are viewing this thread

Aaron Schm

New Member
Messages
3
Reaction score
0
Points
1
Location
Missouri
Does anybody have experience with this particular (or similar) shower handle? I need to replace the cartridge, and I can’t figure out how to get it off.

There is no visible set screw, and I’ve tried running a blade around the solid front cap to see if that pops off...no luck.

Anything else I should try?

moen-concentrix-gold.jpg
 

Aaron Schm

New Member
Messages
3
Reaction score
0
Points
1
Location
Missouri
Usually, the round cap unscrews, sometimes needing a fair amount of force, then the screw is under it.

by round cap, you mean just the front cap, and not the entire handle that turns, right? So, if I get a couple of channel locks and work the front cap against the rest of the handle it should unscrew (with sufficient force)?
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks