Bob from accounting
Member
Connecting 1/4" flex tubing to 1/2" PVC pipe.
I have the drain end of the RO system that needs to traverse the distance of the entire garage. It is all mounted up in the ceiling of the garage.
Would this work if I ran 1/4" flex tubing drain 5' horizontally out of the RO system to a 1/2" PVC pipe mounted in the ceiling, this will slope and traverse 18' to the other side of the garage, from there it will elbow down and out of the ceiling and down into the utility sink 6" below.
I saw that there is a John Guest 1/4" to 1/2" threaded male adaptor. This could maybe thread int the PVC? I am needing some help on how to get 1/4" flex tubing to connect to 1/2" PVC so I can run it the length of the garage. Or help guide me to a better option.
Any help is appreciated.
https://www.homedepot.com/p/John-Gu...h-to-Connect-Adapter-Fitting-803309/300753463
I have the drain end of the RO system that needs to traverse the distance of the entire garage. It is all mounted up in the ceiling of the garage.
Would this work if I ran 1/4" flex tubing drain 5' horizontally out of the RO system to a 1/2" PVC pipe mounted in the ceiling, this will slope and traverse 18' to the other side of the garage, from there it will elbow down and out of the ceiling and down into the utility sink 6" below.
I saw that there is a John Guest 1/4" to 1/2" threaded male adaptor. This could maybe thread int the PVC? I am needing some help on how to get 1/4" flex tubing to connect to 1/2" PVC so I can run it the length of the garage. Or help guide me to a better option.
Any help is appreciated.
https://www.homedepot.com/p/John-Gu...h-to-Connect-Adapter-Fitting-803309/300753463