I currently have a 20gal pressure tank for my well setup and find we don't have great pressure/flow in the house. There is 3/4 aquapex coming in from the polypipe to the tank, and then into the iron remover/softener. First question: what would I gain if I increased the tank to 30 or 40 gallons? Same pressure and less drops? Second question: would I get any noticeable flow rate going from 3/4" to 1" pex from the polypipe to the iron remover? It's 3/4" through the rest of the house up until the fixtures. Even if I keep the 3/4", someone put a sharkbite on a joint and also put a standard port valve in line. I plan to replace both regardless..
Any advice would be appreciated.
Thanks
Any advice would be appreciated.
Thanks