Question: Should a submersible pump be set in the well casing or can it go deeper into the bore hole?
My well is 105 deep', the casing is 95' leaving 10' uncased at the bottom. I know the pump should be at least 5' off the bottom. Is there any advantage to setting the pump so it's in the casing?
I'm installing a new pump.
Well has 65' of standing water. Yield is 18 gpm.
I get no sediment in the filter with the pump at 5' off the bottom.
My well is 105 deep', the casing is 95' leaving 10' uncased at the bottom. I know the pump should be at least 5' off the bottom. Is there any advantage to setting the pump so it's in the casing?
I'm installing a new pump.
Well has 65' of standing water. Yield is 18 gpm.
I get no sediment in the filter with the pump at 5' off the bottom.
Last edited: