Banjo Bud
Active Member
I am hooked up. It was a nasty project. I'm more sore than I've been in years. So, the CSV valve needed a bit of adjustment to maintain 50 psi with a faucet running. My pressure switch is set to turn the pump on at 40 and off at 60. My PK1A tank is set to 38 psi. Everything seems to be working as it should, I think. My question has to do with pump run time. When I turn a faucet on, the pressure gage slowly drops from 60 to 40, as it should. The pump comes on and the pressure rises to 50, all is good. When I turn my faucet off, it takes 43 seconds for the pressure to go from 50 to 60 and turn off. Is that good number? Also, if I turn a faucet on, wait for the pressure to drop to 40, the pump comes on and I simultaneously turn the faucet off, it takes 58 seconds for the pump to reach 60 and turn off. It that a good number? Thanks guys.