waynereg
New Member
Hello all.
Having a troubleshooting issue.
Recently installed a Takagi Tankless indoor NG water heater. I have checked the natural gas line and read all the troubleshooting advice there. ( checked flow, bled the lines, etc.)
Hot and cold are hook up properly, have also been bled and the filter on the cold water side has been removed and looked at.
I CANNOT get the initial startup to go.
I have followed the start up from the manual step-by-step repeatedly to no avail.
The facets act as though no hot water heater has been connected at all. I can only get cold water from the taps. Nothing comes out of the hot water when called upon.
Any suggestions welcome.
Thanks for your time.
Having a troubleshooting issue.
Recently installed a Takagi Tankless indoor NG water heater. I have checked the natural gas line and read all the troubleshooting advice there. ( checked flow, bled the lines, etc.)
Hot and cold are hook up properly, have also been bled and the filter on the cold water side has been removed and looked at.
I CANNOT get the initial startup to go.
I have followed the start up from the manual step-by-step repeatedly to no avail.
The facets act as though no hot water heater has been connected at all. I can only get cold water from the taps. Nothing comes out of the hot water when called upon.
Any suggestions welcome.
Thanks for your time.