Jimmyjames4900
New Member
threaded 1 1/4 screwed in my Gould single pipe 2 inch well, what’s this actually called and where can I find it.
,threaded 1 1/4? Is that a measurement or what? threaded 1-1/4 pvc is 1.660 OD. Add a coupler, and I don't know how you would fit that into a 2 inch pipe. 1 inch PVC Pipe is 1.315 OD.
Anyway, that should be schedule 80 PVC pipe. It is possibly be an inferior pipe (compared to schedule 80) that should not be threaded.
How about OD and ID numbers?
The adapter connects straight to pump, other end just has that screwed fitting in it. It’s the same piece shown in first pic, the 1 inch slips inside it, that’s how the local well companies donit I guess. I was just replaceing all my stuff from the flood last two years. Had it on a piece of property I own. So was no rush to get water back on.Does the adapter, in the area above your second photo, have one or two pipes that connect to the pump?
I had interpreted #5 as saying only one pipe went between the top and the pump.but still had to adapt at the top and bottom to the well head and jet
This is awkward, but...
It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.
If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.