twistedDNA
New Member
I replaced my old pump as it was barely giving me any pressure and it was very old. Before the new pump was dropped the 82 feet into the well casing I tested it above ground and it had a ton of pressure but there was also a slit in the pipe where it was leaking. I fixed that put the pump back in it had lots of pressure for 3 days then slowly started to lose pressure. I thought OK the pipe had split before maybe it split again or is leaking at the fittings or at the patch I put in. Bought new pipe to use but ran the new pump again above ground to check for leaks before I replaced the pipe and I can't find one and the pressure seems up to par. I have a leak somewhere but it only shows up after its in the ground. HELP!