inexplorata
New Member
So I'm installing a new soaker tub in the house, which means getting the thing inside.
It's wide and deep, and won't make it through the front door by several inches, even with a hearty tilt. The only place it's coming in is through the vinyl sliding glass door, and then only if I can get the stationary door off.
Which is the problem.
I got the sliding door out, pulled the track, and can't for the life of me figure out how to get the center bar out to remove the stationary door. There aren't any screws, nor screw-caps to pop out to find screws. I pulled out the plastic trim on the outside to discover (as I peered through the glass) there was at least one screw going into the glass pane from the outside.
I'm going with the "don't try it if it might break" theory of pulling stuff apart, but I'm at a loss. Does anyone have any ideas? Am I missing something obvious?
It's wide and deep, and won't make it through the front door by several inches, even with a hearty tilt. The only place it's coming in is through the vinyl sliding glass door, and then only if I can get the stationary door off.
Which is the problem.
I got the sliding door out, pulled the track, and can't for the life of me figure out how to get the center bar out to remove the stationary door. There aren't any screws, nor screw-caps to pop out to find screws. I pulled out the plastic trim on the outside to discover (as I peered through the glass) there was at least one screw going into the glass pane from the outside.
I'm going with the "don't try it if it might break" theory of pulling stuff apart, but I'm at a loss. Does anyone have any ideas? Am I missing something obvious?