Shower Extension Arm
Posted by David in Stamford on August 03, 2004 at 20:44:17:
I have an extension arm that extends from a round coupler (two holes offset 90 degrees to transition from verticle to horizontal) that will hold the shower head. The extension arm looks somewhat like a shepherds crook. When I thread it into the coupler, with a wrap or two of teflon tape, it only goes 3/4 of the way around on the final turn and does not point downward. I hestitate to force it that last 1/4 turn. If I give it five or six wraps of the tape, it will tighten at the correct position, but drips. Advice appreciated.

Replies to this post