Re: water levels in Gerber toilets
Posted by e-plumber on April 10, 2004 at 20:57:26:
In response to Re: water levels in Gerber toilets

: I don't know if this is on topic but can someone tell me how to put more water into the bowl. I have to flush at least 2 times and I believe that it is because there is not enough water going into the bowl at the end of a flush to be ready for the next flush. Thanks for any help

The only way to make sure you're getting the right amount of water in the bowl is to be sure the refill tube from the fill valve is clipped onto the overflow tube and filling water into it, that's what creates the toilet bowls seal. Some older 1.6 gallon per flush toilets are poorly designed and do not flush well.

Replies to this post