Re: Moving washer and dryer
Posted by Gary Swart on March 23, 2004 at 16:47:32:
In response to Re: Moving washer and dryer
Adapting to that pipe might be the simplest part of what you want to do. That line must be at least 2" diameter, be vented, and there must be a trap. The trap would be just above the floor, so that would not be too difficult. As far as connecting to the existing pipe, since it apparently has threads, you can get an adapter that will screw in/on to it that will have whatever other type connector you want. A few more details would be helpful.


Replies to this post
There are none.