re-plumb under slab
Posted by Nate on March 07, 2004 at 02:27:22:
About to start a remodel project to convert an old basement 'WC/toilet stall' into a full bath. I'll need to break open the slab and re-plumb a bunch of the DWV system obviously for the new service/fittings/etc.

Looking for advice on the best place to start breaking into the slab. I had planned to start close to the existing flange and work my way out little by little to the main line.

I want to move quickly, but I also don't want to tear up more of the floor than needed. Any advice for the best course of action?

Thanks, Nate

Replies to this post