Re: Bath room exhaust fan

Posted by Dale's Plumbing Service Inc on April 01, 19100 at 18:10:43:
In response to Re: Bath room exhaust fan
: : I am having trouble finding a bath room exhaust fan.My home was built in the 50's.The original exhaust fan was vented thru the wall via a 6 1/4" diameter hole.: Exhausted in Pewaukee : HI TIM : YOU CAN GET A FITTING MADE FROM SMOKE PIPE THAT WILL REDUCE THE PIPE SIZE DOWN TO 3 OR 4 " WHAT EVER SIZE FAN EXHAUST YOU BY YOU NEED EITHER A 6X3,4 REDUCER OR A 5X3,4 REDUCER YOU CAN GET THESE AT ANY PLACE THAT SELLS AIR CONDITIONING PRODUCTS OR HOME DEPOT ETC... : MEASURE THE INSIDE DIAMETER OF THE HOOD THAT SHOULD TELL YOU IF ITS 5" OR 6" YOU ALSO WANT TO TRY TO GET THE MALE END OF THE REDUCER OR INCREASER TO GO INTO THE HOOD : GOOD LUCK : KEVIN You need to get a hold of someone who has a granger catolog. I'll bet you find it there. Dale's Plumbing Service Inc

Posted by Dale's Plumbing Service Inc on April 01, 19100 at 18:10:43:

In response to Re: Bath room exhaust fan

: : I am having trouble finding a bath room exhaust fan.My home was built in the 50's.The original exhaust fan was vented thru the wall via a 6 1/4" diameter hole.: Exhausted in Pewaukee

: HI TIM
: YOU CAN GET A FITTING MADE FROM SMOKE PIPE THAT WILL REDUCE THE PIPE SIZE DOWN TO 3 OR 4 " WHAT EVER SIZE FAN EXHAUST YOU BY YOU NEED EITHER A 6X3,4 REDUCER OR A 5X3,4 REDUCER YOU CAN GET THESE AT ANY PLACE THAT SELLS AIR CONDITIONING PRODUCTS OR HOME DEPOT ETC...
: MEASURE THE INSIDE DIAMETER OF THE HOOD THAT SHOULD TELL YOU IF ITS 5" OR 6" YOU ALSO WANT TO TRY TO GET THE MALE END OF THE REDUCER OR INCREASER TO GO INTO THE HOOD
: GOOD LUCK
: KEVIN

You need to get a hold of someone who has a granger catolog. I'll bet you find it there. Dale's Plumbing Service Inc

Replies to this post

Re: Bath room exhaust fan tim 13:19:24 4/02/100(0)