|Posted by Steve on March 04, 1999 at 10:40:27:|
I am replacing very old 1/2" copper water pipe coming from my water meter. I have ok water presure. Would I gain anything from increasing the pipe size to 3/4". It is 3/4" coming out of the water meter that steps down to 1/2" after about 6".
I am redoing a bath. Took out an old tile floor and plywood subfloor. Hardwood floor now shows. The problem now is that the toilet flange is now about 1" above the floor. As a temporary fix while remodling I have 3/4" plywood under the base of the toilet. Is there an easy way to lower the flange or am I stuck raising the floor.