Re: Dishwasher hook up
Posted by Ken on November 08, 1998 at 12:58:05:
In response to Re: Dishwasher hook up
Thanks for the info.. That did it!
: A standard dishwasher supply line would be soft copper 3/8" OD. The fitting at the dishwasher would be a dishwasher 90 el, 3/8"MIP x 3/8" OD compression. It is a good ideal to at least replace the brass compression sleeve on the end that meets the dishwasher 90 el.
: Terry

Replies to this post
There are none.